NEW PRODUCTS
AVAILABLE
Jammer arms, re-engineered for faster setup and smarter loading
The RPM Power Jammer Arms 2.0 bring adaptable strength training to a compatible RPM Power rack without the awkward setup and fixed loading feel associated with traditional jammer arms. Their two-part dolly-and-arm design, Mag-pin connection, rail-mounted adjustment and cable-plus-plate loading options create a more practical system for pressing, pulling and total-body training.
KEY FEATURES
- Two-part Mag-pin setup: fit the 7kg Pulley Carriage Dolly to the upright first, then connect the approximately 14kg main arm separately—rather than lifting the full assembly in one piece.
- Rail-mounted dollies: move the arms quickly up and down the rails without removing and manually repositioning the complete assembly.
- Leave on or remove in seconds: keep the dollies on the rails between sessions, or remove them quickly by releasing the rear-dolly pin.
- Cable + plate loading: use cable stacks for resistance from the start of the movement, then add plates to introduce greater load toward the top of the arc.
- Adjustable resistance curve: combine cable and plate loading to create a resistance profile that better suits the exercise and user preference.
- Locked plane or full free motion: lock the arms into a defined straight or angled path, or release the pin for unrestricted multi-directional movement.
- Independent, expandable design: train unilaterally or together, with height-adjustable handles and an optional Leg Press Add-On designed for a 1.1m upright gap.
KEY SPECIFICATIONS
Jammer Arms compatibilityAny 75mm × 75mm uprights with 18mm holes
Leg Press Add-On fitDesigned for a 1.1m gap between uprights; recommended for RPM Power ODIN and APEX Racks
Steel tube75mm × 75mm × 3mm, black powder-coated finish
Main arm weightApproximately 14kg
Pulley Carriage Dolly weightApproximately 7kg
Compatibility and safe setup: Jammer Arms 2.0 are designed for any rack with 75mm × 75mm uprights and 18mm holes. The optional Leg Press Add-On is designed around a 1.1m gap between uprights and is therefore recommended for the RPM Power ODIN and APEX range. It may work with slightly different widths, but performance will not be optimal. Ensure the rack is correctly installed and secured in accordance with its product instructions before use. The rack, cable system, weight plate pegs and optional Leg Press Add-On are not included unless expressly stated.
Jammer Arms 2.0 Detailed Description
The RPM Power Jammer Arms 2.0 rethink the traditional jammer-arm experience. The system separates the 7kg Pulley Carriage Dolly from the approximately 14kg main arm, so they can be fitted in sequence rather than lifting the full assembly in one piece. Fit the dolly first, connect the arm with Mag pins, then move the assembly quickly along the rails. Add cable-stack resistance, plate loading or both, and choose a defined movement plane or full free motion to build the training setup around the exercise.
Why Jammer Arms 2.0 Are Different
Swipe or scroll through the cards. Select a card to reveal the full detail.
↔
+
Two-Piece Installation
Fit the 7kg dolly first, then connect the approximately 14kg main arm.
Jammer Arms 2.0 use a two-piece setup: the Pulley Carriage Dolly and main arm are separate components. Attach the approximately 7kg Pulley Carriage Dolly to the upright first, then connect the approximately 14kg main arm independently using the Mag-pin connection. This divides installation into lighter individual steps rather than requiring the full assembly to be lifted in one piece.
This gives the system a simpler, more confident installation process. The core rail-mounted hardware can then remain in position while the arms are connected, adjusted or removed as required.
+
Move Quickly Along the Rails
Reposition on the dolly rather than removing and manually moving the complete arm.
Once the dollies are installed, Jammer Arms 2.0 can be moved quickly up and down the rails to change the working height for the next exercise. This removes the need to take the complete jammer-arm assembly off the upright just to reposition it.
When you want the rack clear, the dollies can be left on the rails or removed quickly. Simply release the pin at the rear dolly and remove the assembly in seconds. This creates a practical balance between keeping the system ready to use and freeing the rack when required.
+
A Smarter Resistance Curve
Use cable stacks from the start, then add plates for greater load later in the movement.
With a plate-only jammer arm, the effective plate load changes substantially throughout the movement. The plates exert comparatively little resistance at the lower part of the arc and become more effective as the arms approach horizontal. That can create a large change in perceived resistance from the bottom to the top of a repetition.
Jammer Arms 2.0 can connect to compatible cable stacks, allowing the selected cable resistance to be applied from the start of the movement. Combine the cable stacks with weight plates to build a different resistance curve: cable resistance through the range, with additional plate-driven loading as the arms rise. This gives the user more choice over how the exercise feels across each repetition.
+
Defined Path or Full Free Motion
Lock a straight or angled plane, or release the pin for unrestricted movement.
When you want a defined, repeatable movement, lock the arms into a chosen plane. The locked path can be set from straight to multiple angled positions, helping you create a controlled motion for the exercise you are performing.
Release the pin to unlock full free motion and let the arms move in the direction that best suits your preferred exercise. This selectability is central to the design: use a guided path where you want it, or move freely where you do not.
Traditional Jammer Arms vs. Jammer Arms 2.0
| Common traditional limitation | Jammer Arms 2.0 approach | Training benefit |
|---|---|---|
| One-piece lifting during setup | Separate 7kg Pulley Carriage Dolly and approximately 14kg main arm with Mag-pin connection | A simpler installation process with lower individual handling weights |
| Manual removal to change height | Rail-mounted dollies that travel up and down the upright | Quicker exercise setup changes |
| Plate-only resistance curve | Compatible cable-stack connection plus plate loading | More options to tailor resistance across the movement |
| One fixed movement style | Lockable planes with optional full free motion | Choose controlled guidance or multi-directional freedom |
Independent Arms and Optional Leg Press Expansion
The independent-arm design lets you train one side at a time, alternate repetitions or use both arms together. With the adjustable rail height, height-adjustable handles, selectable movement plane and multiple resistance options, the pair can support a broad range of upper-body, lower-body and total-body exercise variations.
Add the optional Leg Press Add-On to bridge the two arms with a footplate and create a horizontal leg-press configuration. The footplate is designed around a 1.1m gap between uprights, so it is recommended for the RPM Power ODIN and APEX range. It may work with slightly different upright widths, but performance will not be optimal. The footplate is optional and sold separately; images showing it are provided to demonstrate the expanded setup only.
Construction and Specifications
| Product | RPM Power Jammer Arms 2.0 |
|---|---|
| Jammer Arms compatibility | Any 75mm × 75mm uprights with 18mm holes |
| Leg Press Add-On fit | Designed for a 1.1m upright gap; recommended for RPM Power ODIN and APEX Racks |
| Setup design | Separate rail dolly and arm with Mag-pin connection |
| Steel tube | 75mm × 75mm × 3mm |
| Main arm weight | Approximately 14kg |
| Pulley Carriage Dolly weight | Approximately 7kg |
| Finish | Black powder coated |
| Resistance options | Plate-loaded, compatible cable connection, or both combined |
| Motion options | Lockable defined plane or full free motion |
Compatibility and Safe Setup
Jammer Arms 2.0 are designed for any rack with 75mm × 75mm uprights and 18mm holes. This compatibility applies to the Jammer Arms themselves and is not restricted to the RPM Power ODIN or APEX range.
The optional Leg Press Add-On is designed around a 1.1m gap between uprights. It is therefore recommended for the RPM Power ODIN and APEX range. The footplate may work with slightly different upright widths, but it will not perform optimally outside the intended 1.1m spacing.
Before use, confirm your rack specification and ensure the rack is installed and secured in accordance with its product instructions. Check that the dolly, arms and pins are fitted correctly before training. Select the load, range of motion and exercise variation appropriately for the user and the training environment.
The rack, compatible cable system, cable attachments, weight plates and optional Leg Press Add-On are separate items unless expressly stated otherwise.
What is included: Jammer Arms 2.0 are supplied as a pair of independent arms with their rail-dolly mounting system. Images that show a leg-press footplate illustrate the optional Leg Press Add-On configuration. Please review the selected product variation and included-items information before purchase.
| Variations | Jammer Arms 2.0, Jammer Arms 2.0 + Leg Press Attachment |
|---|---|
| Optional Weight Plate Attachment (Pair) | Included, Not Included |
Jammer Arms Specifications:
Weight: 28kg per arm
Grip Positions: Neutral, High, Low & 45 Degrees
Weight Capacity: 120kg Per Arm
Material: Laser-cut steel featuring a zinc-coated steel weight pin and a high-tensile locking pin.
Additional Features:
- Steel Pull Pin
- Zinc Plated Steel Weight Pin
- Nylon Plating
- Steel Lock Pin
- Laser Cut Design with Powder Coated Finish
The daily cut-off times for orders dispatched from RPM Power is 12pm. We aim to dispatch orders within the time frames outlined on our Shipping & Deliveries page. All times are measured in business days only and exclude weekends and Republic of Ireland public holidays.
Dispatch and delivery timeframes should be considered as estimates and are not guaranteed. These can vary during peak seasons and end-of-sale periods. We will draw your attention to any dispatch delays that may be occurring during these periods with a notice on our website.
Parcel orders: Small/lightweight items are dispatched via the courier network and automated tracking details will be provided to you. To ensure minimal shipping costs for our customers, some items may arrive in multiple packages. Although dispatched together, these packages can often become separated on their way to you and some may arrive a day later than the others.
Pallet orders: Heavy/oversized items are dispatched via the pallet network. Please note that there is no tracking reference provided for pallet deliveries and they are kerbside delivery service only meaning that the delivery driver will not bring your item(s) inside your home. Read our article on pallet deliveries for more information.
At RPM Power, customer satisfaction is our highest priority. We are committed to supporting you with any product-related concerns that may arise. While it is inevitable that issues may occasionally occur, our warranty policy is designed with a customer-focused approach to ensure a fair and efficient resolution.
All RPM Power products are covered under warranty. Warranty coverage varies depending on product type. For full details, please read our Warranties Terms and Conditions.
Description
Jammer arms, re-engineered for faster setup and smarter loading
The RPM Power Jammer Arms 2.0 bring adaptable strength training to a compatible RPM Power rack without the awkward setup and fixed loading feel associated with traditional jammer arms. Their two-part dolly-and-arm design, Mag-pin connection, rail-mounted adjustment and cable-plus-plate loading options create a more practical system for pressing, pulling and total-body training.
KEY FEATURES
- Two-part Mag-pin setup: fit the 7kg Pulley Carriage Dolly to the upright first, then connect the approximately 14kg main arm separately—rather than lifting the full assembly in one piece.
- Rail-mounted dollies: move the arms quickly up and down the rails without removing and manually repositioning the complete assembly.
- Leave on or remove in seconds: keep the dollies on the rails between sessions, or remove them quickly by releasing the rear-dolly pin.
- Cable + plate loading: use cable stacks for resistance from the start of the movement, then add plates to introduce greater load toward the top of the arc.
- Adjustable resistance curve: combine cable and plate loading to create a resistance profile that better suits the exercise and user preference.
- Locked plane or full free motion: lock the arms into a defined straight or angled path, or release the pin for unrestricted multi-directional movement.
- Independent, expandable design: train unilaterally or together, with height-adjustable handles and an optional Leg Press Add-On designed for a 1.1m upright gap.
KEY SPECIFICATIONS
Jammer Arms compatibilityAny 75mm × 75mm uprights with 18mm holes
Leg Press Add-On fitDesigned for a 1.1m gap between uprights; recommended for RPM Power ODIN and APEX Racks
Steel tube75mm × 75mm × 3mm, black powder-coated finish
Main arm weightApproximately 14kg
Pulley Carriage Dolly weightApproximately 7kg
Compatibility and safe setup: Jammer Arms 2.0 are designed for any rack with 75mm × 75mm uprights and 18mm holes. The optional Leg Press Add-On is designed around a 1.1m gap between uprights and is therefore recommended for the RPM Power ODIN and APEX range. It may work with slightly different widths, but performance will not be optimal. Ensure the rack is correctly installed and secured in accordance with its product instructions before use. The rack, cable system, weight plate pegs and optional Leg Press Add-On are not included unless expressly stated.
Detailed Description
Jammer Arms 2.0 Detailed Description
The RPM Power Jammer Arms 2.0 rethink the traditional jammer-arm experience. The system separates the 7kg Pulley Carriage Dolly from the approximately 14kg main arm, so they can be fitted in sequence rather than lifting the full assembly in one piece. Fit the dolly first, connect the arm with Mag pins, then move the assembly quickly along the rails. Add cable-stack resistance, plate loading or both, and choose a defined movement plane or full free motion to build the training setup around the exercise.
Why Jammer Arms 2.0 Are Different
Swipe or scroll through the cards. Select a card to reveal the full detail.
↔
+
Two-Piece Installation
Fit the 7kg dolly first, then connect the approximately 14kg main arm.
Jammer Arms 2.0 use a two-piece setup: the Pulley Carriage Dolly and main arm are separate components. Attach the approximately 7kg Pulley Carriage Dolly to the upright first, then connect the approximately 14kg main arm independently using the Mag-pin connection. This divides installation into lighter individual steps rather than requiring the full assembly to be lifted in one piece.
This gives the system a simpler, more confident installation process. The core rail-mounted hardware can then remain in position while the arms are connected, adjusted or removed as required.
+
Move Quickly Along the Rails
Reposition on the dolly rather than removing and manually moving the complete arm.
Once the dollies are installed, Jammer Arms 2.0 can be moved quickly up and down the rails to change the working height for the next exercise. This removes the need to take the complete jammer-arm assembly off the upright just to reposition it.
When you want the rack clear, the dollies can be left on the rails or removed quickly. Simply release the pin at the rear dolly and remove the assembly in seconds. This creates a practical balance between keeping the system ready to use and freeing the rack when required.
+
A Smarter Resistance Curve
Use cable stacks from the start, then add plates for greater load later in the movement.
With a plate-only jammer arm, the effective plate load changes substantially throughout the movement. The plates exert comparatively little resistance at the lower part of the arc and become more effective as the arms approach horizontal. That can create a large change in perceived resistance from the bottom to the top of a repetition.
Jammer Arms 2.0 can connect to compatible cable stacks, allowing the selected cable resistance to be applied from the start of the movement. Combine the cable stacks with weight plates to build a different resistance curve: cable resistance through the range, with additional plate-driven loading as the arms rise. This gives the user more choice over how the exercise feels across each repetition.
+
Defined Path or Full Free Motion
Lock a straight or angled plane, or release the pin for unrestricted movement.
When you want a defined, repeatable movement, lock the arms into a chosen plane. The locked path can be set from straight to multiple angled positions, helping you create a controlled motion for the exercise you are performing.
Release the pin to unlock full free motion and let the arms move in the direction that best suits your preferred exercise. This selectability is central to the design: use a guided path where you want it, or move freely where you do not.
Traditional Jammer Arms vs. Jammer Arms 2.0
| Common traditional limitation | Jammer Arms 2.0 approach | Training benefit |
|---|---|---|
| One-piece lifting during setup | Separate 7kg Pulley Carriage Dolly and approximately 14kg main arm with Mag-pin connection | A simpler installation process with lower individual handling weights |
| Manual removal to change height | Rail-mounted dollies that travel up and down the upright | Quicker exercise setup changes |
| Plate-only resistance curve | Compatible cable-stack connection plus plate loading | More options to tailor resistance across the movement |
| One fixed movement style | Lockable planes with optional full free motion | Choose controlled guidance or multi-directional freedom |
Independent Arms and Optional Leg Press Expansion
The independent-arm design lets you train one side at a time, alternate repetitions or use both arms together. With the adjustable rail height, height-adjustable handles, selectable movement plane and multiple resistance options, the pair can support a broad range of upper-body, lower-body and total-body exercise variations.
Add the optional Leg Press Add-On to bridge the two arms with a footplate and create a horizontal leg-press configuration. The footplate is designed around a 1.1m gap between uprights, so it is recommended for the RPM Power ODIN and APEX range. It may work with slightly different upright widths, but performance will not be optimal. The footplate is optional and sold separately; images showing it are provided to demonstrate the expanded setup only.
Construction and Specifications
| Product | RPM Power Jammer Arms 2.0 |
|---|---|
| Jammer Arms compatibility | Any 75mm × 75mm uprights with 18mm holes |
| Leg Press Add-On fit | Designed for a 1.1m upright gap; recommended for RPM Power ODIN and APEX Racks |
| Setup design | Separate rail dolly and arm with Mag-pin connection |
| Steel tube | 75mm × 75mm × 3mm |
| Main arm weight | Approximately 14kg |
| Pulley Carriage Dolly weight | Approximately 7kg |
| Finish | Black powder coated |
| Resistance options | Plate-loaded, compatible cable connection, or both combined |
| Motion options | Lockable defined plane or full free motion |
Compatibility and Safe Setup
Jammer Arms 2.0 are designed for any rack with 75mm × 75mm uprights and 18mm holes. This compatibility applies to the Jammer Arms themselves and is not restricted to the RPM Power ODIN or APEX range.
The optional Leg Press Add-On is designed around a 1.1m gap between uprights. It is therefore recommended for the RPM Power ODIN and APEX range. The footplate may work with slightly different upright widths, but it will not perform optimally outside the intended 1.1m spacing.
Before use, confirm your rack specification and ensure the rack is installed and secured in accordance with its product instructions. Check that the dolly, arms and pins are fitted correctly before training. Select the load, range of motion and exercise variation appropriately for the user and the training environment.
The rack, compatible cable system, cable attachments, weight plates and optional Leg Press Add-On are separate items unless expressly stated otherwise.
What is included: Jammer Arms 2.0 are supplied as a pair of independent arms with their rail-dolly mounting system. Images that show a leg-press footplate illustrate the optional Leg Press Add-On configuration. Please review the selected product variation and included-items information before purchase.
Specifications
| Variations | Jammer Arms 2.0, Jammer Arms 2.0 + Leg Press Attachment |
|---|---|
| Optional Weight Plate Attachment (Pair) | Included, Not Included |
Jammer Arms Specifications:
Weight: 28kg per arm
Grip Positions: Neutral, High, Low & 45 Degrees
Weight Capacity: 120kg Per Arm
Material: Laser-cut steel featuring a zinc-coated steel weight pin and a high-tensile locking pin.
Additional Features:
- Steel Pull Pin
- Zinc Plated Steel Weight Pin
- Nylon Plating
- Steel Lock Pin
- Laser Cut Design with Powder Coated Finish
Shipping
The daily cut-off times for orders dispatched from RPM Power is 12pm. We aim to dispatch orders within the time frames outlined on our Shipping & Deliveries page. All times are measured in business days only and exclude weekends and Republic of Ireland public holidays.
Dispatch and delivery timeframes should be considered as estimates and are not guaranteed. These can vary during peak seasons and end-of-sale periods. We will draw your attention to any dispatch delays that may be occurring during these periods with a notice on our website.
Parcel orders: Small/lightweight items are dispatched via the courier network and automated tracking details will be provided to you. To ensure minimal shipping costs for our customers, some items may arrive in multiple packages. Although dispatched together, these packages can often become separated on their way to you and some may arrive a day later than the others.
Pallet orders: Heavy/oversized items are dispatched via the pallet network. Please note that there is no tracking reference provided for pallet deliveries and they are kerbside delivery service only meaning that the delivery driver will not bring your item(s) inside your home. Read our article on pallet deliveries for more information.
Warranty
At RPM Power, customer satisfaction is our highest priority. We are committed to supporting you with any product-related concerns that may arise. While it is inevitable that issues may occasionally occur, our warranty policy is designed with a customer-focused approach to ensure a fair and efficient resolution.
All RPM Power products are covered under warranty. Warranty coverage varies depending on product type. For full details, please read our Warranties Terms and Conditions.
Jammer arms, re-engineered for faster setup and smarter loading
The RPM Power Jammer Arms 2.0 bring adaptable strength training to a compatible RPM Power rack without the awkward setup and fixed loading feel associated with traditional jammer arms. Their two-part dolly-and-arm design, Mag-pin connection, rail-mounted adjustment and cable-plus-plate loading options create a more practical system for pressing, pulling and total-body training.
KEY FEATURES
- Two-part Mag-pin setup: fit the 7kg Pulley Carriage Dolly to the upright first, then connect the approximately 14kg main arm separately—rather than lifting the full assembly in one piece.
- Rail-mounted dollies: move the arms quickly up and down the rails without removing and manually repositioning the complete assembly.
- Leave on or remove in seconds: keep the dollies on the rails between sessions, or remove them quickly by releasing the rear-dolly pin.
- Cable + plate loading: use cable stacks for resistance from the start of the movement, then add plates to introduce greater load toward the top of the arc.
- Adjustable resistance curve: combine cable and plate loading to create a resistance profile that better suits the exercise and user preference.
- Locked plane or full free motion: lock the arms into a defined straight or angled path, or release the pin for unrestricted multi-directional movement.
- Independent, expandable design: train unilaterally or together, with height-adjustable handles and an optional Leg Press Add-On designed for a 1.1m upright gap.
KEY SPECIFICATIONS
Jammer Arms compatibilityAny 75mm × 75mm uprights with 18mm holes
Leg Press Add-On fitDesigned for a 1.1m gap between uprights; recommended for RPM Power ODIN and APEX Racks
Steel tube75mm × 75mm × 3mm, black powder-coated finish
Main arm weightApproximately 14kg
Pulley Carriage Dolly weightApproximately 7kg
Compatibility and safe setup: Jammer Arms 2.0 are designed for any rack with 75mm × 75mm uprights and 18mm holes. The optional Leg Press Add-On is designed around a 1.1m gap between uprights and is therefore recommended for the RPM Power ODIN and APEX range. It may work with slightly different widths, but performance will not be optimal. Ensure the rack is correctly installed and secured in accordance with its product instructions before use. The rack, cable system, weight plate pegs and optional Leg Press Add-On are not included unless expressly stated.
Jammer Arms 2.0 Detailed Description
The RPM Power Jammer Arms 2.0 rethink the traditional jammer-arm experience. The system separates the 7kg Pulley Carriage Dolly from the approximately 14kg main arm, so they can be fitted in sequence rather than lifting the full assembly in one piece. Fit the dolly first, connect the arm with Mag pins, then move the assembly quickly along the rails. Add cable-stack resistance, plate loading or both, and choose a defined movement plane or full free motion to build the training setup around the exercise.
Why Jammer Arms 2.0 Are Different
Swipe or scroll through the cards. Select a card to reveal the full detail.
↔
+
Two-Piece Installation
Fit the 7kg dolly first, then connect the approximately 14kg main arm.
Jammer Arms 2.0 use a two-piece setup: the Pulley Carriage Dolly and main arm are separate components. Attach the approximately 7kg Pulley Carriage Dolly to the upright first, then connect the approximately 14kg main arm independently using the Mag-pin connection. This divides installation into lighter individual steps rather than requiring the full assembly to be lifted in one piece.
This gives the system a simpler, more confident installation process. The core rail-mounted hardware can then remain in position while the arms are connected, adjusted or removed as required.
+
Move Quickly Along the Rails
Reposition on the dolly rather than removing and manually moving the complete arm.
Once the dollies are installed, Jammer Arms 2.0 can be moved quickly up and down the rails to change the working height for the next exercise. This removes the need to take the complete jammer-arm assembly off the upright just to reposition it.
When you want the rack clear, the dollies can be left on the rails or removed quickly. Simply release the pin at the rear dolly and remove the assembly in seconds. This creates a practical balance between keeping the system ready to use and freeing the rack when required.
+
A Smarter Resistance Curve
Use cable stacks from the start, then add plates for greater load later in the movement.
With a plate-only jammer arm, the effective plate load changes substantially throughout the movement. The plates exert comparatively little resistance at the lower part of the arc and become more effective as the arms approach horizontal. That can create a large change in perceived resistance from the bottom to the top of a repetition.
Jammer Arms 2.0 can connect to compatible cable stacks, allowing the selected cable resistance to be applied from the start of the movement. Combine the cable stacks with weight plates to build a different resistance curve: cable resistance through the range, with additional plate-driven loading as the arms rise. This gives the user more choice over how the exercise feels across each repetition.
+
Defined Path or Full Free Motion
Lock a straight or angled plane, or release the pin for unrestricted movement.
When you want a defined, repeatable movement, lock the arms into a chosen plane. The locked path can be set from straight to multiple angled positions, helping you create a controlled motion for the exercise you are performing.
Release the pin to unlock full free motion and let the arms move in the direction that best suits your preferred exercise. This selectability is central to the design: use a guided path where you want it, or move freely where you do not.
Traditional Jammer Arms vs. Jammer Arms 2.0
| Common traditional limitation | Jammer Arms 2.0 approach | Training benefit |
|---|---|---|
| One-piece lifting during setup | Separate 7kg Pulley Carriage Dolly and approximately 14kg main arm with Mag-pin connection | A simpler installation process with lower individual handling weights |
| Manual removal to change height | Rail-mounted dollies that travel up and down the upright | Quicker exercise setup changes |
| Plate-only resistance curve | Compatible cable-stack connection plus plate loading | More options to tailor resistance across the movement |
| One fixed movement style | Lockable planes with optional full free motion | Choose controlled guidance or multi-directional freedom |
Independent Arms and Optional Leg Press Expansion
The independent-arm design lets you train one side at a time, alternate repetitions or use both arms together. With the adjustable rail height, height-adjustable handles, selectable movement plane and multiple resistance options, the pair can support a broad range of upper-body, lower-body and total-body exercise variations.
Add the optional Leg Press Add-On to bridge the two arms with a footplate and create a horizontal leg-press configuration. The footplate is designed around a 1.1m gap between uprights, so it is recommended for the RPM Power ODIN and APEX range. It may work with slightly different upright widths, but performance will not be optimal. The footplate is optional and sold separately; images showing it are provided to demonstrate the expanded setup only.
Construction and Specifications
| Product | RPM Power Jammer Arms 2.0 |
|---|---|
| Jammer Arms compatibility | Any 75mm × 75mm uprights with 18mm holes |
| Leg Press Add-On fit | Designed for a 1.1m upright gap; recommended for RPM Power ODIN and APEX Racks |
| Setup design | Separate rail dolly and arm with Mag-pin connection |
| Steel tube | 75mm × 75mm × 3mm |
| Main arm weight | Approximately 14kg |
| Pulley Carriage Dolly weight | Approximately 7kg |
| Finish | Black powder coated |
| Resistance options | Plate-loaded, compatible cable connection, or both combined |
| Motion options | Lockable defined plane or full free motion |
Compatibility and Safe Setup
Jammer Arms 2.0 are designed for any rack with 75mm × 75mm uprights and 18mm holes. This compatibility applies to the Jammer Arms themselves and is not restricted to the RPM Power ODIN or APEX range.
The optional Leg Press Add-On is designed around a 1.1m gap between uprights. It is therefore recommended for the RPM Power ODIN and APEX range. The footplate may work with slightly different upright widths, but it will not perform optimally outside the intended 1.1m spacing.
Before use, confirm your rack specification and ensure the rack is installed and secured in accordance with its product instructions. Check that the dolly, arms and pins are fitted correctly before training. Select the load, range of motion and exercise variation appropriately for the user and the training environment.
The rack, compatible cable system, cable attachments, weight plates and optional Leg Press Add-On are separate items unless expressly stated otherwise.
What is included: Jammer Arms 2.0 are supplied as a pair of independent arms with their rail-dolly mounting system. Images that show a leg-press footplate illustrate the optional Leg Press Add-On configuration. Please review the selected product variation and included-items information before purchase.
| Variations | Jammer Arms 2.0, Jammer Arms 2.0 + Leg Press Attachment |
|---|---|
| Optional Weight Plate Attachment (Pair) | Included, Not Included |
Jammer Arms Specifications:
Weight: 28kg per arm
Grip Positions: Neutral, High, Low & 45 Degrees
Weight Capacity: 120kg Per Arm
Material: Laser-cut steel featuring a zinc-coated steel weight pin and a high-tensile locking pin.
Additional Features:
- Steel Pull Pin
- Zinc Plated Steel Weight Pin
- Nylon Plating
- Steel Lock Pin
- Laser Cut Design with Powder Coated Finish
The daily cut-off times for orders dispatched from RPM Power is 12pm. We aim to dispatch orders within the time frames outlined on our Shipping & Deliveries page. All times are measured in business days only and exclude weekends and Republic of Ireland public holidays.
Dispatch and delivery timeframes should be considered as estimates and are not guaranteed. These can vary during peak seasons and end-of-sale periods. We will draw your attention to any dispatch delays that may be occurring during these periods with a notice on our website.
Parcel orders: Small/lightweight items are dispatched via the courier network and automated tracking details will be provided to you. To ensure minimal shipping costs for our customers, some items may arrive in multiple packages. Although dispatched together, these packages can often become separated on their way to you and some may arrive a day later than the others.
Pallet orders: Heavy/oversized items are dispatched via the pallet network. Please note that there is no tracking reference provided for pallet deliveries and they are kerbside delivery service only meaning that the delivery driver will not bring your item(s) inside your home. Read our article on pallet deliveries for more information.
At RPM Power, customer satisfaction is our highest priority. We are committed to supporting you with any product-related concerns that may arise. While it is inevitable that issues may occasionally occur, our warranty policy is designed with a customer-focused approach to ensure a fair and efficient resolution.
All RPM Power products are covered under warranty. Warranty coverage varies depending on product type. For full details, please read our Warranties Terms and Conditions.
Description
Jammer arms, re-engineered for faster setup and smarter loading
The RPM Power Jammer Arms 2.0 bring adaptable strength training to a compatible RPM Power rack without the awkward setup and fixed loading feel associated with traditional jammer arms. Their two-part dolly-and-arm design, Mag-pin connection, rail-mounted adjustment and cable-plus-plate loading options create a more practical system for pressing, pulling and total-body training.
KEY FEATURES
- Two-part Mag-pin setup: fit the 7kg Pulley Carriage Dolly to the upright first, then connect the approximately 14kg main arm separately—rather than lifting the full assembly in one piece.
- Rail-mounted dollies: move the arms quickly up and down the rails without removing and manually repositioning the complete assembly.
- Leave on or remove in seconds: keep the dollies on the rails between sessions, or remove them quickly by releasing the rear-dolly pin.
- Cable + plate loading: use cable stacks for resistance from the start of the movement, then add plates to introduce greater load toward the top of the arc.
- Adjustable resistance curve: combine cable and plate loading to create a resistance profile that better suits the exercise and user preference.
- Locked plane or full free motion: lock the arms into a defined straight or angled path, or release the pin for unrestricted multi-directional movement.
- Independent, expandable design: train unilaterally or together, with height-adjustable handles and an optional Leg Press Add-On designed for a 1.1m upright gap.
KEY SPECIFICATIONS
Jammer Arms compatibilityAny 75mm × 75mm uprights with 18mm holes
Leg Press Add-On fitDesigned for a 1.1m gap between uprights; recommended for RPM Power ODIN and APEX Racks
Steel tube75mm × 75mm × 3mm, black powder-coated finish
Main arm weightApproximately 14kg
Pulley Carriage Dolly weightApproximately 7kg
Compatibility and safe setup: Jammer Arms 2.0 are designed for any rack with 75mm × 75mm uprights and 18mm holes. The optional Leg Press Add-On is designed around a 1.1m gap between uprights and is therefore recommended for the RPM Power ODIN and APEX range. It may work with slightly different widths, but performance will not be optimal. Ensure the rack is correctly installed and secured in accordance with its product instructions before use. The rack, cable system, weight plate pegs and optional Leg Press Add-On are not included unless expressly stated.
Detailed Description
Jammer Arms 2.0 Detailed Description
The RPM Power Jammer Arms 2.0 rethink the traditional jammer-arm experience. The system separates the 7kg Pulley Carriage Dolly from the approximately 14kg main arm, so they can be fitted in sequence rather than lifting the full assembly in one piece. Fit the dolly first, connect the arm with Mag pins, then move the assembly quickly along the rails. Add cable-stack resistance, plate loading or both, and choose a defined movement plane or full free motion to build the training setup around the exercise.
Why Jammer Arms 2.0 Are Different
Swipe or scroll through the cards. Select a card to reveal the full detail.
↔
+
Two-Piece Installation
Fit the 7kg dolly first, then connect the approximately 14kg main arm.
Jammer Arms 2.0 use a two-piece setup: the Pulley Carriage Dolly and main arm are separate components. Attach the approximately 7kg Pulley Carriage Dolly to the upright first, then connect the approximately 14kg main arm independently using the Mag-pin connection. This divides installation into lighter individual steps rather than requiring the full assembly to be lifted in one piece.
This gives the system a simpler, more confident installation process. The core rail-mounted hardware can then remain in position while the arms are connected, adjusted or removed as required.
+
Move Quickly Along the Rails
Reposition on the dolly rather than removing and manually moving the complete arm.
Once the dollies are installed, Jammer Arms 2.0 can be moved quickly up and down the rails to change the working height for the next exercise. This removes the need to take the complete jammer-arm assembly off the upright just to reposition it.
When you want the rack clear, the dollies can be left on the rails or removed quickly. Simply release the pin at the rear dolly and remove the assembly in seconds. This creates a practical balance between keeping the system ready to use and freeing the rack when required.
+
A Smarter Resistance Curve
Use cable stacks from the start, then add plates for greater load later in the movement.
With a plate-only jammer arm, the effective plate load changes substantially throughout the movement. The plates exert comparatively little resistance at the lower part of the arc and become more effective as the arms approach horizontal. That can create a large change in perceived resistance from the bottom to the top of a repetition.
Jammer Arms 2.0 can connect to compatible cable stacks, allowing the selected cable resistance to be applied from the start of the movement. Combine the cable stacks with weight plates to build a different resistance curve: cable resistance through the range, with additional plate-driven loading as the arms rise. This gives the user more choice over how the exercise feels across each repetition.
+
Defined Path or Full Free Motion
Lock a straight or angled plane, or release the pin for unrestricted movement.
When you want a defined, repeatable movement, lock the arms into a chosen plane. The locked path can be set from straight to multiple angled positions, helping you create a controlled motion for the exercise you are performing.
Release the pin to unlock full free motion and let the arms move in the direction that best suits your preferred exercise. This selectability is central to the design: use a guided path where you want it, or move freely where you do not.
Traditional Jammer Arms vs. Jammer Arms 2.0
| Common traditional limitation | Jammer Arms 2.0 approach | Training benefit |
|---|---|---|
| One-piece lifting during setup | Separate 7kg Pulley Carriage Dolly and approximately 14kg main arm with Mag-pin connection | A simpler installation process with lower individual handling weights |
| Manual removal to change height | Rail-mounted dollies that travel up and down the upright | Quicker exercise setup changes |
| Plate-only resistance curve | Compatible cable-stack connection plus plate loading | More options to tailor resistance across the movement |
| One fixed movement style | Lockable planes with optional full free motion | Choose controlled guidance or multi-directional freedom |
Independent Arms and Optional Leg Press Expansion
The independent-arm design lets you train one side at a time, alternate repetitions or use both arms together. With the adjustable rail height, height-adjustable handles, selectable movement plane and multiple resistance options, the pair can support a broad range of upper-body, lower-body and total-body exercise variations.
Add the optional Leg Press Add-On to bridge the two arms with a footplate and create a horizontal leg-press configuration. The footplate is designed around a 1.1m gap between uprights, so it is recommended for the RPM Power ODIN and APEX range. It may work with slightly different upright widths, but performance will not be optimal. The footplate is optional and sold separately; images showing it are provided to demonstrate the expanded setup only.
Construction and Specifications
| Product | RPM Power Jammer Arms 2.0 |
|---|---|
| Jammer Arms compatibility | Any 75mm × 75mm uprights with 18mm holes |
| Leg Press Add-On fit | Designed for a 1.1m upright gap; recommended for RPM Power ODIN and APEX Racks |
| Setup design | Separate rail dolly and arm with Mag-pin connection |
| Steel tube | 75mm × 75mm × 3mm |
| Main arm weight | Approximately 14kg |
| Pulley Carriage Dolly weight | Approximately 7kg |
| Finish | Black powder coated |
| Resistance options | Plate-loaded, compatible cable connection, or both combined |
| Motion options | Lockable defined plane or full free motion |
Compatibility and Safe Setup
Jammer Arms 2.0 are designed for any rack with 75mm × 75mm uprights and 18mm holes. This compatibility applies to the Jammer Arms themselves and is not restricted to the RPM Power ODIN or APEX range.
The optional Leg Press Add-On is designed around a 1.1m gap between uprights. It is therefore recommended for the RPM Power ODIN and APEX range. The footplate may work with slightly different upright widths, but it will not perform optimally outside the intended 1.1m spacing.
Before use, confirm your rack specification and ensure the rack is installed and secured in accordance with its product instructions. Check that the dolly, arms and pins are fitted correctly before training. Select the load, range of motion and exercise variation appropriately for the user and the training environment.
The rack, compatible cable system, cable attachments, weight plates and optional Leg Press Add-On are separate items unless expressly stated otherwise.
What is included: Jammer Arms 2.0 are supplied as a pair of independent arms with their rail-dolly mounting system. Images that show a leg-press footplate illustrate the optional Leg Press Add-On configuration. Please review the selected product variation and included-items information before purchase.
Specifications
| Variations | Jammer Arms 2.0, Jammer Arms 2.0 + Leg Press Attachment |
|---|---|
| Optional Weight Plate Attachment (Pair) | Included, Not Included |
Jammer Arms Specifications:
Weight: 28kg per arm
Grip Positions: Neutral, High, Low & 45 Degrees
Weight Capacity: 120kg Per Arm
Material: Laser-cut steel featuring a zinc-coated steel weight pin and a high-tensile locking pin.
Additional Features:
- Steel Pull Pin
- Zinc Plated Steel Weight Pin
- Nylon Plating
- Steel Lock Pin
- Laser Cut Design with Powder Coated Finish
Shipping
The daily cut-off times for orders dispatched from RPM Power is 12pm. We aim to dispatch orders within the time frames outlined on our Shipping & Deliveries page. All times are measured in business days only and exclude weekends and Republic of Ireland public holidays.
Dispatch and delivery timeframes should be considered as estimates and are not guaranteed. These can vary during peak seasons and end-of-sale periods. We will draw your attention to any dispatch delays that may be occurring during these periods with a notice on our website.
Parcel orders: Small/lightweight items are dispatched via the courier network and automated tracking details will be provided to you. To ensure minimal shipping costs for our customers, some items may arrive in multiple packages. Although dispatched together, these packages can often become separated on their way to you and some may arrive a day later than the others.
Pallet orders: Heavy/oversized items are dispatched via the pallet network. Please note that there is no tracking reference provided for pallet deliveries and they are kerbside delivery service only meaning that the delivery driver will not bring your item(s) inside your home. Read our article on pallet deliveries for more information.
Warranty
At RPM Power, customer satisfaction is our highest priority. We are committed to supporting you with any product-related concerns that may arise. While it is inevitable that issues may occasionally occur, our warranty policy is designed with a customer-focused approach to ensure a fair and efficient resolution.
All RPM Power products are covered under warranty. Warranty coverage varies depending on product type. For full details, please read our Warranties Terms and Conditions.
Our customers love us!
Our customers love us!
Filter by
Price
€€
Category Type
Height (cm)
Width (cm)
Length (cm)
Range
Recommended Use
Colour
PREMIER EXPRESS SHIPPING
Get Your Order Delivered Fast!
Looking for faster delivery? With Premier Shipping by RPM Power, you can receive select items within 24 working hours in Ireland & 48 Hours in UK via DHL Express. This premium service is ideal for customers who need their order quickly and want the peace of mind of tracked express delivery.
Premier Shipping is available for eligible items under 30kg. While our standard shipping (via GLS) typically delivers within 2–4 working days, Premier Shipping ensures priority dispatch and express delivery.
Please note:
-
Premier Shipping is available only on select products.
-
In the United Kingdom, there are two DHL Premier Shipping options available: Premier Shipping Express and Premier Shipping Economy. The main difference is the delivery timeframe. Premier Shipping Economy typically delivers within 2–4 working days, while Premier Shipping Express delivers faster, usually within 1–2 working days.
-
RPM Power reserves the right to cancel or adjust any order where the DHL shipping cost significantly exceeds anticipated rates due to size, weight, or delivery location.
-
Orders must be placed before [11.15am] to qualify for next-day delivery.
- Premier Delivery only counts for orders placed on weekdays. If, for example you order on a Saturday or Friday afternoon, the order will not be dispatched until Monday.
-
RPM Power is not liable for any damages that occur during DHL’s transit. For full details on DHL’s service terms, please refer to their Terms & Conditions.
- Premier Shipping only qualifies on workdays (Monday - Friday), orders placed on Saturday or Sunday will be dispatched on Monday.
PREMIER EXPRESS SHIPPING DETAILS
Urgent, Time Sensitive ParcelsNext Possible Business Day / 2 Days to Mainland UK |
|||
| Delivered on Next Possible Day | 12:00PM | ||
| Available Countries | Ireland, Great Britain, France, Germany, and Luxembourg | ||
| Door to Door Courier Delivered | ✅ | ||
| End-to-End Tracking Visibility | ✅ | ||
| Proactive Delivery Notifications | ✅ | ||
| Customs Clearance Facilitation |
✅ |
| Delivery Management | ✅ | ||
| Money-Back Guarantee | ✅ | ||
| Specifications | |||
| Documents | ✅ | ||
| Packages | ✅ | ||
| Max Piece Weight | 30kg | ||
| Pallets | ☓ |
Login
Register
Register now and get 100% FREE access to RPM Care, special offers, pre-order preference notifications, updates, exercises and nutrition tips, and so much more!👇
